Hydraulic Filter
Hydraulic Scanner Specifications
Materials: Filter body • Carbon steel with polyester or epoxy powder coating
Filtration Range • 80 to 500 micron
Pressure
Max Working • up to10 bar (145 psi)
Min Pressure • 2 bar (29 psi)
During Flushing
Max Temp • 65°C (149°F)
Clean Screen • up to 0.1 bar (1.45 psi)
Pressure Loss
Inlet/outlet • Flanged 4”-14”
Control Voltage • 9 V/12 VDC/24 VAC
Inlet/outlet parallel.
A time basis backup (preset by the customer), guarantees that flushing cycle will occur even if the head loss has not reached the present value.
General Information
These automatic hydraulic filters combine the advantages of high quality filtration from different water sources (sewage, reservoirs, lakes, etc.) with selfcleaning features, offering the customer a continuous water supply.
The filters are designed for use in a wide range of industrial, municipal and irrigation applications. The main element is made of stainless steel with a large filtration open area for water flow in order to withstand high dirt load and pressure. Cleaning of the screen is performed once the pressure loss across the filter has reached the preset value (up to 0.5 bar or 7 psi).
The filter is equipped with a coarse screen that protects the finer screen from stones and larger particles.
The flushing valve opens and pressure is released from the hydraulic piston, then water flows outside through the flushing valve. Pressure in the hydraulic motor chamber and the dirt collector is significantly lowered, the dirt collector nozzles movement and rotation cleans the screen’s entire internal surface. The flushing cycle takes 10 seconds. The flushing valve closes at the end of the cycle and the filter is clean.
During the whole process, water supply is uninterrupted.
- Cover
- Body
- Coarse Screen
- Fine Screen
- Collector
- Suction Nozzle
- Hydraulic Motor
- Flushing chamber
- Flushing valve
- Piston
- Pressure gauge
- Controller